Tornado Foam Gun

The Tornado Foam Gun is designed to work with air compressor, with air pressure between 0.5 to 0.8Mpa, allows you to presoak the vehicle with clinging foam. The foam won't fall off, and always stays where it's sprayed. The foam produced by this foam gun is very stiff and very dry, This prolongs the exposure and reaction time and improves the cleaning effect many times over.

The sprayer gun works with an air compressor, quickly blast foam. The higher the air pressure, the greater the foam generated by the gun. The unique barrel on the gun mixes the car wash and pressurized air to create a blizzard of foam. Use the pressure valve on the gun as little or as much foam as you need.

This Tornado Foam Gun can be used with any neutral foaming cleaner, such as car shampoos, car wash, carpet and upholstery cleaners, and non-acidic wheel cleaners.

This foam gun is also ideal for interior carpet and fabric cleaning. Spray the carpet and fabric seat with foam, use a brush to agitate the sprayed area. Then wipe with a microfiber drying towel, and vacuum.

This foam gun comes with a wide nozzle, great for using on exterior of vehicle and provides more concentrated strip of product that will cling better, help you save the cleaner. Particularly suitable for all intensive pre-cleaning work that requires a longer exposure.

Instruction:

Thoroughly flush all parts of the foam gun with water between uses to prevent cross-contamination of vehicle surfaces.

Rinsing down the vehicle with a water hose.

Mix the desired shampoo with water as directed on the product’s label.

Attach the nozzle to the jar tightly and attach the gun to the air compressor.

Turn on the air compressor and spray the vehicle with foam.

Turn off the air compressor and agitate vehicle with a wash sponge or wash mitt.

Rinse with your water hose!